Struct calcu_rs::rational::Int

#[repr(transparent)]
pub struct Int(Integer);

Tuple Fields

0: Integer

Implementations

impl Int

pub const ZERO: Int = _

pub const ONE: Int = _

pub const TWO: Int = _

pub fn binomial_coeff(n: &Int, k: &Int) -> Int

pub fn range_inclusive(start: Self, stop: Self) -> RangeInclusive<Int>

pub fn is_one(&self) -> bool

pub fn is_zero(&self) -> bool

pub fn gcd(&self, other: &Self) -> Self

Trait Implementations

impl Add<&Int> for Int

type Output = Int

The resulting type after applying the + operator.

fn add(self, rhs: &Self) -> Self::Output

Performs the + operation.

impl Add for Int

type Output = Int

The resulting type after applying the + operator.

fn add(self, rhs: Self) -> Self::Output

Performs the + operation.

impl AddAssign<&Int> for Int

fn add_assign(&mut self, rhs: &Self)

Performs the += operation.

impl AddAssign for Int

fn add_assign(&mut self, rhs: Self)

Performs the += operation.

impl Clone for Int

fn clone(&self) -> Int

Returns a copy of the value.

fn clone_from(&mut self, source: &Self)

Performs copy-assignment from source.

impl Debug for Int

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter.

impl Default for Int

fn default() -> Int

Returns the “default value” for a type.

impl Display for Int

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter.

impl Div<&Int> for Int

type Output = Int

The resulting type after applying the / operator.

fn div(self, rhs: &Self) -> Self::Output

Performs the / operation.

impl Div for Int

type Output = Int

The resulting type after applying the / operator.

fn div(self, rhs: Self) -> Self::Output

Performs the / operation.

impl DivAssign<&Int> for Int

fn div_assign(&mut self, rhs: &Self)

Performs the /= operation.

impl DivAssign for Int

fn div_assign(&mut self, rhs: Self)

Performs the /= operation.

impl From<Int> for Rational

fn from(value: Int) -> Self

Converts to this type from the input type.

impl From<u64> for Int

fn from(value: u64) -> Self

Converts to this type from the input type.

impl Hash for Int

fn hash<__H: Hasher>(&self, state: &mut __H)

Feeds this value into the given Hasher.

fn hash_slice<H>(data: &[Self], state: &mut H)

where H: Hasher, Self: Sized,

Feeds a slice of this type into the given Hasher.

impl Mul<&Int> for Int

type Output = Int

The resulting type after applying the * operator.

fn mul(self, rhs: &Self) -> Self::Output

Performs the * operation.

impl Mul for Int

type Output = Int

The resulting type after applying the * operator.

fn mul(self, rhs: Self) -> Self::Output

Performs the * operation.

impl MulAssign<&Int> for Int

fn mul_assign(&mut self, rhs: &Self)

Performs the *= operation.

impl MulAssign for Int

fn mul_assign(&mut self, rhs: Self)

Performs the *= operation.

impl One for Int

fn one() -> Self

Returns the multiplicative identity element of Self, 1.

fn set_one(&mut self)

Sets self to the multiplicative identity element of Self, 1.

fn is_one(&self) -> bool

where Self: PartialEq,

Returns true if self is equal to the multiplicative identity.

impl Ord for Int

fn cmp(&self, other: &Int) -> Ordering

This method returns an Ordering between self and other.

fn max(self, other: Self) -> Self

where Self: Sized,

Compares and returns the maximum of two values.

fn min(self, other: Self) -> Self

where Self: Sized,

Compares and returns the minimum of two values.

fn clamp(self, min: Self, max: Self) -> Self

where Self: Sized + PartialOrd,

Restrict a value to a certain interval.

impl PartialEq for Int

fn eq(&self, other: &Int) -> bool

This method tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Rhs) -> bool

This method tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.

impl PartialOrd for Int

fn partial_cmp(&self, other: &Int) -> Option<Ordering>

This method returns an ordering between self and other values if one exists.

fn lt(&self, other: &Rhs) -> bool

This method tests less than (for self and other) and is used by the < operator.

fn le(&self, other: &Rhs) -> bool

This method tests less than or equal to (for self and other) and is used by the <= operator.

fn gt(&self, other: &Rhs) -> bool

This method tests greater than (for self and other) and is used by the > operator.

fn ge(&self, other: &Rhs) -> bool

This method tests greater than or equal to (for self and other) and is used by the >= operator.

impl RefCast for Int

type From = Integer

fn ref_cast(_from: &Self::From) -> &Self

fn ref_cast_mut(_from: &mut Self::From) -> &mut Self

impl Sub<&Int> for Int

type Output = Int

The resulting type after applying the - operator.

fn sub(self, rhs: &Self) -> Self::Output

Performs the - operation.

impl Sub for Int

type Output = Int

The resulting type after applying the - operator.

fn sub(self, rhs: Self) -> Self::Output

Performs the - operation.

impl SubAssign<&Int> for Int

fn sub_assign(&mut self, rhs: &Self)

Performs the -= operation.

impl SubAssign for Int

fn sub_assign(&mut self, rhs: Self)

Performs the -= operation.

impl ToPrimitive for Int

fn to_i64(&self) -> Option<i64>

Converts the value of self to an i64. If the value cannot be represented by an i64, then None is returned.

fn to_u64(&self) -> Option<u64>

Converts the value of self to a u64. If the value cannot be represented by a u64, then None is returned.

fn to_u128(&self) -> Option<u128>

Converts the value of self to a u128. If the value cannot be represented by a u128 (u64 under the default implementation), then None is returned.

fn to_i128(&self) -> Option<i128>

Converts the value of self to an i128. If the value cannot be represented by an i128 (i64 under the default implementation), then None is returned.

fn to_isize(&self) -> Option<isize>

Converts the value of self to an isize. If the value cannot be represented by an isize, then None is returned.

fn to_i8(&self) -> Option<i8>

Converts the value of self to an i8. If the value cannot be represented by an i8, then None is returned.

fn to_i16(&self) -> Option<i16>

Converts the value of self to an i16. If the value cannot be represented by an i16, then None is returned.

fn to_i32(&self) -> Option<i32>

Converts the value of self to an i32. If the value cannot be represented by an i32, then None is returned.

fn to_usize(&self) -> Option<usize>

Converts the value of self to a usize. If the value cannot be represented by a usize, then None is returned.

fn to_u8(&self) -> Option<u8>

Converts the value of self to a u8. If the value cannot be represented by a u8, then None is returned.

fn to_u16(&self) -> Option<u16>

Converts the value of self to a u16. If the value cannot be represented by a u16, then None is returned.

fn to_u32(&self) -> Option<u32>

Converts the value of self to a u32. If the value cannot be represented by a u32, then None is returned.

fn to_f32(&self) -> Option<f32>

Converts the value of self to an f32. Overflows may map to positive or negative inifinity, otherwise None is returned if the value cannot be represented by an f32.

fn to_f64(&self) -> Option<f64>

Converts the value of self to an f64. Overflows may map to positive or negative inifinity, otherwise None is returned if the value cannot be represented by an f64.

impl TryFrom<Rational> for Int

type Error = ()

The type returned in the event of a conversion error.

fn try_from(value: Rational) -> Result<Self, Self::Error>

Performs the conversion.

impl Eq for Int

impl StructuralPartialEq for Int